Operating Notes for Telehandler Steering Mode Selection

Telehandlers are widely used in construction sites, agricultural yards and large-scale material storage areas for their flexible mobility and heavy load handling capacity. The steering mode selection directly affects operation safety, passing performance and overall service life of the equipment, so operators need to follow standardized rules when adjusting different steering modes. First, operators must complete steering mode switching under stationary state or at a low speed below 3km/h, never switch steering modes when driving at high speed with heavy load, which may cause unexpected sideslip or rollover risk. For different working scenarios, you need to select the most matching steering mode accordingly. When working in narrow indoor warehouse aisles, select the crab walk steering mode to realize lateral movement, so that you can adjust the vehicle position without repeated forward and backward movement, greatly improving operation efficiency in limited space. When driving on wide open working sites with flat and good road conditions, select the front wheel steering mode, which is the most stable mode for long-distance moving, and can effectively reduce the wear of tires and steering system components. When working on unstructured roads with potholes, muddy or uneven surface, select the four wheel steering mode, which gets a smaller turning radius, and helps you pass through complex road sections smoothly without repeated turning back. Before you switch any steering mode, you need to confirm all wheels are in correct aligned state, check the indicator light on the control panel to make sure the system has fully completed mode switching before you start subsequent operations. Do not turn the steering wheel violently during mode switching, which may cause unnecessary damage to the hydraulic steering structure. For users who need professional technical support of related equipment, you can contact Jianshu New Energy to get targeted operation guidance, and the professional service team of BYD Forklift can also provide regular safety check and operation training for your equipment fleets. If you have any consultation demand about telehandler operation norms, you can send email to 17399989919@163.com for further reply. Daily pre-operation check should also include the inspection of steering mode response function, if you find delay of mode switching or abnormal indicator alarm, you should stop the equipment for inspection in time, do not operate the equipment with hidden safety trouble. Strictly following these steering mode selection rules can effectively reduce operation safety risks, extend the service life of core components of the telehandler, and bring more stable operation performance for daily material handling work.