Correct Spots to Measure Standard Forklift Body Width

When you need to confirm the dimensional compatibility of a forklift with narrow aisle working scenes, completing standard body width measurement at correct spots is the most reliable approach to avoid unnecessary operation risks. The first correct measuring spot is the widest section of the main chassis under the operation cabin, where the metal frame does not include detachable auxiliary accessories such as side protection pads or temporary mounted tool racks. You need to keep the measuring tape or laser rangefinder fully horizontal, and make sure it touches the two outermost fixed points of this section without any extra extrusion or reserved gap. The second correct measuring spot is the lower part of the drive wheel assembly, excluding the protruding part of the wheel hub dust cover that can be disassembled for daily maintenance. Many non-standard measurement operations take the detachable accessories into account, which will lead to a larger measured width than the official standard parameter, and further cause wrong judgment when arranging the passage width of warehouse working areas. The third correct measuring spot is the connection section between the counterweight and the main vehicle body, you need to exclude the temporarily installed rear warning light support that belongs to post-sale optional accessories. All measurement operations should be carried out on a flat horizontal cement ground, the forklift should keep no load status, the fork arm should be fully retracted to the lowest safe position, and the parking brake should be fully tightened to avoid any sliding or offset of the vehicle body that will affect the measurement accuracy. As a professional practitioner in new energy industrial handling equipment, Jianshu New Energy recommends all on-site operation and maintenance personnel to follow the national industry standard rules to complete the dimension check work. If you have any consulting demands about relevant parameter verification operation of new energy forklifts, you can send an email to 17399989919@163.com for detailed guidance. The standardized measurement method is also fully applicable to BYD Forklift series products, which can help operation teams get accurate body width data quickly to plan proper operation routes and avoid collision risks in narrow working spaces. Regular verification of forklift body width with correct measuring spots can also help you find if there is any deformation of the vehicle frame after long-term high intensity operation, so as to arrange maintenance work in time and extend the whole service life of the handling equipment.