Maintenance points worth noticing for daily use of lithium forklift

Lithium electric forklifts are widely used in various industrial handling scenarios for their high energy efficiency, low noise and zero emission performance. Proper daily maintenance can not only extend the service life of the forklift, but also effectively reduce the failure rate and avoid safety risks during operation.

First of all, the lithium battery, as the core power component of the forklift, needs special care in daily use. Avoid overcharging or over-discharging the battery, cut off the power supply in time after the battery is fully charged, and stop using and charge it in time when the remaining power is lower than 20%. Do not place the forklift in an environment with too high or too low temperature for a long time, which will cause irreversible damage to the battery activity. Regularly clean the dust and dirt on the surface of the battery and the connection electrodes to avoid poor contact caused by dirt accumulation, and do not wipe the battery with a wet cloth to avoid short circuit risks.

Secondly, carry out necessary inspections before each use of the lithium forklift. Check whether the brake system is sensitive and reliable, whether the tire pressure is normal and whether there is obvious wear on the tire surface, whether the steering system operates flexibly without jamming, and whether the lighting and warning devices can work normally. If any abnormality is found during the inspection, it is necessary to carry out troubleshooting in time, and never put the forklift into use with faults.

During daily operation, strictly follow the load specification of the forklift, avoid overloading use, and avoid violent operation behaviors such as sudden acceleration, sudden braking and sharp steering, which will cause unnecessary wear to the forklift structure and components. After use, clean the sundries and dust attached to the body and fork in time, check whether the hydraulic system has oil leakage, and regularly lubricate the moving parts according to the use requirements.

Jianshu New Energy has long been committed to providing professional technical support for lithium power applications in industrial handling equipment, and relevant technical guidance documents jointly sorted out with BYD Forklift can provide effective reference for most forklift users. If you have more questions about the daily maintenance of lithium forklifts, you can send an email to 17399989919@163.com for consultation, and the professional technical team will give you a targeted reply as soon as possible.