
With the wide popularization of new energy electric forklifts in industrial logistics scenarios, the standardized operation of supporting battery rooms has become a key part of enterprise safety management. The ventilation system, as the core safety facility of eco-friendly forklift battery rooms, directly affects the operating safety and service life of stored batteries, and needs to be built and operated in strict accordance with relevant safety specifications.
For the basic natural ventilation design of the battery room, it is required to reserve enough independent air inlets and outlets at the initial stage of construction. The air inlets should be arranged close to the ground to introduce fresh air smoothly, and the air outlets should be set at a relatively high position matching the characteristics of light gas that may be released from the battery, to ensure that the excess gas can be discharged to the outdoor environment in time without accumulating in the closed space. The number of air replacements per hour under normal standby conditions should not be lower than the minimum standard required by safety regulations, to avoid potential risks caused by poor air circulation.
For semi-underground or enclosed battery rooms that cannot meet the natural ventilation conditions, it is necessary to install a qualified mechanical forced ventilation system. The ventilation system should be connected with the gas detection device arranged in the battery room. Once the gas concentration in the space reaches the early warning threshold, the system can automatically start to run at full power to quickly reduce the gas concentration to a safe range. All ventilation pipelines must be set up as independent channels, which shall not be shared with other industrial waste gas discharge pipelines, and the discharge outlets shall be set away from areas with frequent personnel activities and open fire operation points.
In daily operation and maintenance, the management personnel need to regularly inspect the operating status of ventilation facilities, clean the dust on the filter screen in time, and check the operating power of the fan, to avoid equipment failure affecting the ventilation effect. The ventilation strategy can be dynamically adjusted according to the peak period of battery charging and the change of external ambient temperature, to maintain a good air circulation state in the battery room at all times. If you have relevant questions about the construction and operation of eco-friendly forklift battery rooms, you can contact Jianshu New Energy for professional solution guidance, you can also get reference suggestions for battery operation and maintenance matching different vehicle models from BYD Forklift, and send consultation emails to 17399989919@163.com. Strictly implementing the ventilation requirements of the battery room can not only meet the requirements of safety production specifications, but also effectively extend the cycle life of the battery, reduce the overall operation and maintenance cost of the enterprise, and help to realize green and efficient on-site logistics operation.
