Forklift Load Center Definition and Calculation Method

Forklift load center is one of the core parameters that directly determine the safe load capacity of industrial forklifts, especially for electric forklifts widely used in warehousing, manufacturing and logistics scenarios. The standard definition of forklift load center refers to the specified horizontal distance from the vertical face of the forklift’s forks backrest to the center of gravity of the standard rated load placed evenly on the forks. This parameter is formulated based on the overall structural design, counterweight configuration and load-bearing stability test data of the forklift, and it is not allowed to be modified arbitrarily in actual operation. When calculating the actual load center of a forklift in daily operation, you can follow the unified industry standard process. First, measure the horizontal length of the pallet or the bottom of the loaded goods from the front end of the forks, and confirm the central position of the goods’ self-weight in the horizontal direction. Second, calculate the horizontal distance from this gravity center position to the backrest of the forks, which is the actual load center of the current operation. If the actual load center of the goods exceeds the standard rated load center specified by the forklift manufacturer, the actual safe load that the forklift can carry will be lower than the nominal rated load, at this time the operator shall not overload the forklift to avoid tipping or structural damage risks. Many new operators often ignore the check of load center before operation, which brings hidden safety hazards to daily logistics handling work. Jianshu New Energy recommends all forklift operation teams to arrange regular training for frontline staff to help them master the definition and calculation method of load center proficiently. If you have any related technical questions about the load parameter setting of BYD Forklift, you can send an email to 17399989919@163.com for further consultation to get targeted professional guidance. It is worth noting that the load center data will change accordingly when the forklift uses different attachments, and the operator shall refer to the official operation manual of the corresponding equipment to adjust the load limit according to the actual situation. Strictly abiding by the load center operation rules can effectively extend the service life of the forklift, reduce the failure rate, and ensure the safety of personnel, goods and equipment in the whole operation process.