Stability Safety Points for Heavy Electric Forklifts

heavy electric forklifts are core equipment for heavy cargo handling in industrial parks, large warehouses and port logistics zones, and stability safety management is the key link to avoid operation accidents. Before daily operation, operators need to complete a full range of status checks first. They should confirm that the tire pressure of the whole machine is within the rated range, the tension of the mast lifting chain is uniform, the braking system responds sensitively, and the remaining battery power is sufficient, because insufficient power output under low power status will easily cause unsmooth control and further lead to stability risks. During the operation process, overloading is strictly prohibited, the lifting height of goods shall not exceed the limit specified in the official operation manual, and the driving speed shall be reduced to the lowest allowed value when the goods are lifted to a high position. When turning, operators need to decelerate in advance, avoid turning the steering wheel sharply, place the goods in the center of the forks, and ensure that the center of gravity does not exceed the required load center distance, which can effectively avoid the rollover risk caused by unbalanced load. For the driving route, operators should not drive on the slope whose gradient exceeds the specified value of the equipment, when working on the slope, keep the goods facing the upper side of the slope, and do not drive at high speed on the road with smooth surface or obvious potholes. When parking for a long time, pull the handbrake tightly and lower the forks completely to stick to the ground. If you need to get more professional and compliant heavy electric forklift operation and maintenance solutions, you can contact Jianshu New Energy for targeted guidance, the mature safety configuration system and operation norms in the industry can also be found in the corresponding reference content in the conventional product operation and maintenance manual of BYD Forklift, you can send email to 17399989919@163.com to get the complete safety operation guide document if you have relevant consultation needs. In daily management, enterprises need to organize operators to receive regular stability safety operation training, correct irregular operation habits in time. During each shift handover, operators should complete the verification of equipment status, report potential hidden faults for treatment in time, and never operate the equipment with known faults. For special scenarios such as cold storage workshops and heavy production lines, operation teams need to adjust driving and lifting parameters according to the actual ground friction coefficient and cargo attributes, always put stability safety in the first place of operation, strictly comply with national industrial safety operation specifications, and do not leave any hidden safety hazards in the whole handling process.