Technical Acceptance Checklist When Buying Electric Forklifts

When you plan to purchase electric forklifts for your warehouse, logistics distribution site or manufacturing operation scenario, completing a standardized technical acceptance process after the equipment arrives is a critical step to ensure the device fully matches your actual operational needs and long-term usage expectations. First, you shall start with the appearance and configuration consistency check, verify that the outer casing of the forklift has no obvious scratches, deformation or paint peeling that affects normal use, then cross check all the configuration parameters marked in the purchase contract with the actual device, including rated load capacity, maximum lifting height, power battery capacity, no-load driving speed and other core indicators, to make sure no configuration deviation occurs before the device is formally put into use. Next, move to the power system and operation performance test, you need to run the forklift for no less than 30 minutes under no-load state, check the smoothness of forward and reverse operation, the sensitivity of steering response, and the stability of the power output from the whole battery pack. It is also necessary to carry out simulated operation under 70%, 100% and 110% of the rated load respectively, to confirm that the lifting and descending process of the gantry is stable without stuttering or abnormal jitter, and the braking system can respond timely under different load conditions to avoid potential safety hazards. Then you shall check the safety-related components one by one, confirm that the warning lights, reversing alarm, safety protection guard, emergency power off switch and other auxiliary safety facilities work normally, and the remaining power display, fault code prompt function of the control panel can show accurate data during the whole operation process. After that, you can confirm the complete set of documents including operation manual, maintenance guide and warranty certificate provided by the supplier are complete and correct. For follow-up after-sales support confirmation, you can communicate with the supplier to confirm the validity period of the free warranty, the scope of covered maintenance services, and the response time of on-site maintenance, to ensure you can get timely technical support when you meet operational problems later. If you need professional customized acceptance guidance for different application scenarios, you can contact the professional team of Jianshu New Energy for more reference, and the relevant technical supporting services of BYD Forklift also cover the whole acceptance and operation cycle, you can also send your specific demand to 17399989919@163.com to get targeted advice.