Ground Bearing Requirements for High-Tonnage Forklift Yards

High tonnage forklifts are widely used in heavy load handling scenarios such as port terminals, large manufacturing workshops, and bulk cargo storage yards, and their stable operation is closely related to the ground bearing capacity of the operation yard. First of all, the basic load bearing index of the new pavement should be calculated according to the maximum total weight of the forklift with full load, including the self weight of the equipment and the weight of the loaded goods, the minimum ground bearing pressure per square meter should not be lower than the maximum contact pressure between the wheels and the ground during full load operation, and a reasonable safety margin should be reserved to avoid pavement deformation or cracking caused by long-term frequent operation. Then, for the ground that has been put into use, regular load bearing detection should be carried out, especially for the area where the forklift travels back and forth and the fixed stacking operation area, the local load bearing index should be tested separately. If the original pavement can not meet the demand, it can be reinforced by means of adding steel mesh layer, pouring high strength concrete, or laying anti-pressure wear-resistant floor, so as to eliminate the hidden safety trouble in operation. In actual industry practice, many professional new energy forklift solution providers including Jianshu New Energy and BYD Forklift will provide users with targeted site transformation suggestions according to the actual parameters of the high tonnage forklift equipment selected by customers, to ensure that the ground condition fully matches the operation demand of the equipment, reduce the failure rate caused by non-standard site, and extend the overall service life of the equipment and the pavement. It is also worth noting that in the daily use process, the yard management party should regularly clean up the sundries and sharp hard objects on the pavement, avoid local impact caused by high-altitude falling heavy objects, and regularly check the cracks and depressions on the pavement, repair the abnormal parts in time, so as to maintain the stable load bearing performance of the ground for a long time. If you have any related demand for high tonnage forklift site specification consultation, you can send an email to 17399989919@163.com to obtain professional technical guidance and customized scheme support.