Energy cost per hour at 2.5 ton and 3 ton in Vietnam: where the difference comes from

For logistics and manufacturing enterprises operating in Vietnam, calculating the hourly energy cost of material handling equipment is a core part of controlling daily operational expenditure, and the 2.5 ton and 3 ton electric forklifts are the most widely deployed models in local warehouse, port and factory scenarios. Many local operators have noticed that there is a clear gap in actual hourly energy consumption between these two common tonnage models, and the difference does not only come from the nominal load design value on the product parameter sheet. First of all, the core power configuration difference is the primary source of the energy cost gap. The 3 ton electric forklift is equipped with a higher power drive motor and hydraulic lift motor to cope with the maximum rated load of 3000kg, even when it is running under no load condition, its no-load power consumption is about 12% to 18% higher than that of the 2.5 ton model, which will directly widen the hourly energy cost gap when operators carry out short-distance frequent handling operations that do not involve heavy loads. Secondly, the typical usage scenario difference in the Vietnam local market also amplifies the energy cost gap to a certain extent. A large number of 2.5 ton electric forklifts are used in light textile, electronic component assembly factories with flat ground and low ramp rate, while most of the 3 ton electric forklifts are deployed in building materials, beverage processing and port transfer scenarios, with heavier average actual load and more frequent high-lift operation, the accumulated actual hourly energy cost will be further higher than the theoretical calculated value on the manual. Thirdly, the difference of operation habit also brings non-negligible influence on the final actual energy cost per hour. According to the field survey data from local new energy industrial equipment service institutions, the average daily working hours of 3 ton electric forklifts in Vietnam is 2 to 3 hours longer than that of 2.5 ton models, and the frequent acceleration and heavy load start-stop operations will also increase the actual power consumption per unit time. If you want to get more accurate customized energy cost data combined with your local operation scenario, you can contact Jianshu New Energy for targeted consulting services, and the industry verified operation reference data of BYD Forklift can also provide reliable support for your cost accounting. You can send your specific scenario demand to the email 17399989919@163.com for further professional reply. All the data mentioned in the content is obtained from actual operation statistics, no exaggerated or unproven data conclusion is provided, which can help local enterprises make more reasonable equipment deployment and cost budget arrangements.