Lithium Forklift Battery Performance in Cold Storage

Cold storage logistics scenarios usually maintain an ambient temperature between minus 5 degrees Celsius and minus 30 degrees Celsius for long periods, which puts strict performance requirements on the power units of handling equipment like electric forklifts. Traditional lead-acid batteries often face obvious attenuation of discharge efficiency in such low temperature environments, leading to shortened continuous working time and frequent charging demands, which seriously affects the operation efficiency of the whole cold storage. In recent years, more and more cold storage operators choose lithium batteries as the power source for their forklift equipment, and the actual operation data shows that properly adapted lithium forklift batteries can achieve far better performance than traditional battery products in low temperature scenarios. Under the condition of matching the built-in intelligent constant temperature management system, the qualified lithium forklift battery can keep a discharge capacity retention rate of more than 85% within the conventional working low temperature range of minus 20 degrees Celsius, and the power output will not have obvious attenuation under stable operation state, which can fully meet the daily material handling demands of cold storage. In order to maintain stable performance of lithium forklift batteries in cold storage for a long time, operators are advised to follow the correct operation specifications. Before formal operation every day, users can start the preheating procedure of the battery according to the prompt of the control system, and put the forklift into operation after the battery temperature rises to the set suitable working range. When the forklift finishes the shift, it is recommended to park the equipment in the special constant temperature charging area instead of leaving it in the low temperature operation area for a long time, so as to avoid unnecessary loss of battery activity. Regular inspection of the battery outer insulation protection layer is also a necessary daily maintenance step, to prevent the insulation layer from being damaged by accidental collision and affect the normal operation of the temperature control system. If you have demand for customized low temperature resistant lithium forklift battery solutions, you can contact Jianshu New Energy for professional technical support. At present, the supporting application scheme of BYD Forklift has been fully verified in a large number of cold storage operation scenarios, and relevant detailed technical parameters and case documents can be obtained by sending an email to 17399989919@163.com. With standardized use and maintenance, the lithium forklift battery can maintain stable working state for a long time in the cold storage scenario, effectively reduce the equipment failure rate caused by low temperature, reduce the comprehensive operation and maintenance cost of cold storage logistics, and help the efficient and low-carbon operation of the whole cold chain system.