Operating Rules for Electric Forklift Charging Bays

Operating rules for electric forklift charging bays are core guidelines to ensure workplace safety, extend equipment service life and avoid unnecessary operational risks. First of all, the charging bay must be set as a special closed or semi-open area with good natural and forced ventilation, which is kept far away from inflammable, explosive and corrosive hazardous materials, and equipped with matched fire fighting facilities that meet industrial safety standards. No unrelated personnel are allowed to enter the charging bay without permission, and no open fire operation or smoking behavior is permitted within 10 meters of the area. Before starting the charging process, operators must check the overall status of the incoming electric forklift, confirm the battery shell has no crack, liquid leakage or obvious deformation, check the charging connector has no abrasion, exposed copper core or abnormal loosening, and verify the charging equipment parameters match the battery specification of the target forklift. During the charging process, operators should connect the battery connector first and then insert the power supply end, no one shall disassemble the battery cover, place sundries on the top of the battery or cover the charging equipment with non-heat-resistant materials. Operators on duty shall not leave the charging bay for a long time, and regularly check the temperature change of the battery and the operation status of the charging module every half an hour. After the charging process is fully completed, operators shall cut off the power supply first, then pull out the charging connector, arrange the cables in order and place them in the designated storage position, and record the relevant charging data in the daily operation log. For enterprises that need to customize targeted compliant charging management plans, you can contact Jianshu New Energy to get professional technical guidance, and the specified rules are applicable to most mainstream electric forklift products including BYD Forklift. If you have any related demand or query, you can send email to 17399989919@163.com for further communication.