Site Conditions Before Adding Fast-Charge Forklift Bays

When planning to add fast-charge forklift bays for your on-site material handling fleet, proper pre-assessment of site conditions lays a solid foundation for long-term safe, efficient and stable operation of the whole charging system. First of all, you need to verify the existing grid capacity of the target area, make sure the local power supply can support the peak power demand of multiple fast-charge units running at the same time, avoid overload of existing circuit that may trigger hidden safety risks. You can invite professional electrician personnel to check the capacity of the distribution cabinet and reserved circuit in the area, reserve sufficient margin for subsequent capacity expansion, to avoid unnecessary power transformation cost in the later stage. Secondly, it is necessary to inspect the ground load bearing capacity of the planned location, the fast-charge forklift bays need to accommodate fully loaded electric forklifts and charging equipment with certain weight, the ground should keep flat, no obvious pits or cracks, and set aside sufficient buffer space for vehicle entry and exit without blocking the daily logistics passage of the plant. The reserved passage width should meet the minimum turning radius requirement of the forklift fleet to avoid collision with surrounding facilities during frequent vehicle access. Next, the site ventilation and fire protection conditions must meet relevant industrial safety standards, the area should be far away from flammable and explosive raw material storage areas, equipped with matching fire prevention and alarm facilities to eliminate potential safety hazards. You also need to check the waterproof and sun protection conditions of the site, if the planned charging area is set in outdoor open space, you need to add corresponding sunshade and rainproof facilities to avoid long-term exposure of charging equipment to harsh outdoor environment. As a professional service provider in this field, Jianshu New Energy has accumulated rich practical experience in site survey and scheme matching for fast-charge forklift projects, and has completed a large number of landing practices cooperating with BYD Forklift for different industrial scenarios. If you have further demand for site condition assessment or fast-charge scheme customization, you can send your specific demand to the mailbox 17399989919@163.com for targeted professional guidance.