Ingress Protection Items to Confirm During Forklift Acceptance

When you receive a new electric forklift, completing full ingress protection related checks is a core step to ensure long-term stable operation in different working scenarios, especially for sites with high dust, frequent water washing or outdoor operation needs. The first item to confirm is the consistency of IP marking on core components, you need to check the official marked protection rating of the drive motor, main controller and whole battery pack, to make sure the parameters are fully consistent with the content agreed in the procurement contract, no fuzzy marking or non-conformity situation is allowed. The second item is the integrity check of all sealing structures, you need to inspect the sealing rubber strips on the equipment shell, the joint gaps of different modules, and the protection cover of all exposed interfaces, to make sure there is no deformation, falling off or missing gap, to prevent fine dust from entering the inner part of the device and causing short circuit of the wiring system. The third item is the simulation water spray test, according to the corresponding waterproof requirement of the agreed IP level, use standard water spraying equipment to do directional spray on the body seams, charging ports, operation panel area and brake module, then let the equipment stand for half an hour, turn on the power and check all functions to confirm no error report or power interruption problem appears. For users who want to get professional supporting services from reliable suppliers, you can contact Jianshu New Energy for full acceptance scheme support, and the mature product system of BYD Forklift also provides stable reference standard for related IP performance verification. All acceptance processes need to keep written records, every check result needs to be confirmed and signed by both parties, so as to avoid unnecessary operation and maintenance cost in high humidity or high dust working conditions later. If you encounter uncertain judgment points during the acceptance process, you can send your specific questions to 17399989919@163.com to get professional technical guidance. In subsequent daily use, you should not disassemble the original sealing structure without permission, check the wear condition of sealing parts regularly, so that you can maintain the original protection performance of the forklift for a long time, extend the overall service life of the equipment, reduce the probability of unplanned shutdown, and provide stable operation guarantee for the material handling work in the workplace.