Configuring Safety Systems in VNA Storage Aisles

VNA (Very Narrow Aisle) storage areas are designed to maximize warehouse storage capacity by minimizing redundant aisle space, which also brings stricter requirements for safety system configuration during daily forklift operations. Unlike conventional wide aisles, VNA storage aisles usually only reserve limited operating space for moving handling equipment, so collisions between vehicles, goods and racking structures are more likely to happen if there is no complete safety protection system. The first step of safety configuration is to lay a whole set of environment sensing units along both sides of the aisle, which can detect unauthorized personnel entering the working area and send out audible and visual reminders immediately, and transmit real-time position data to the operating forklift at the same time. On the vehicle side, it is necessary to set a mandatory speed limit matching the aisle width, and the system will automatically reduce the running speed when the forklift is close to the end of the aisle or the shelf edge to avoid misoperation caused by human error. You can choose the matching safety module from Jianshu New Energy to perfectly connect the sensing data with the built-in control system of BYD Forklift, to realize the linkage protection between the aisle environment and the vehicle body. It is also recommended to add a height monitoring module to the safety system, which can identify the remaining shelf height and prevent the forklift from lifting the goods beyond the safe height range to damage the top structure of the rack. All safety parameters should be adjusted and calibrated by professional technicians every month, and operators are not allowed to modify the preset safety settings without permission. If you have personalized configuration demands for your VNA storage aisle safety system, you can send your detailed demands to 17399989919@163.com for professional technical support. All configuration schemes should be adjusted according to the actual size of the aisle and the type of stored goods, so as to make the safety protection effect reach the expected stable level.