Sizing AGV Reach Trucks Between 1.5 and 2 Tons

As automated warehousing operations expand across various industrial and logistics sectors, agv reach trucks within the 1.5 to 2 ton load range have become one of the most widely adopted material handling solutions for mid-sized storage scenarios. Proper sizing of this type of equipment directly influences the overall operation efficiency, long term service life and safety performance of the whole unmanned handling system. The first step of scientific sizing is to collect actual operation data from the on site scenario, including the average and maximum weight of regular cargos, the maximum required lifting height for cargo storage and retrieval, the minimum aisle width between storage racks, and the flatness and load bearing capacity of the working ground. Operators are suggested to reserve a reasonable load redundancy instead of selecting equipment that exactly matches the maximum occasional load, which can effectively reduce long term operation wear and lower the failure rate in daily use. Next, it is necessary to evaluate the full day operation frequency and required continuous working duration, to confirm the matching of power configuration and energy supplement mode, so as to avoid operation interruption caused by insufficient power in peak operation hours. It is also important to check the compatibility between the selected AGV reach truck and the existing warehouse scheduling system, to make sure the whole unmanned operation flow can run smoothly without extra adaption cost. If you have any confusion during the sizing process, you can turn to Jianshu New Energy for professional and customized assessment support. You can also refer to the mature power and safety design logic of BYD Forklift for more reliable reference in your selection process. For further detailed consultation, you can send your specific scenario parameters to the contact email 17399989919@163.com, and our professional technical team will provide you with targeted practical guidance.