Lithium-Ion and Lead-Acid Forklift Battery Use Notes

Electric forklift overall performance is closely linked to the proper use of its supporting battery, and different battery types have differentiated operation requirements that users need to follow strictly to ensure stable operation and extend service life. For lithium-ion forklift batteries, the first key note is to avoid over-discharging in daily use. Users should not drain the battery power completely before charging, and it is recommended to arrange timely charging when the remaining power drops to around 20% to prevent irreversible damage to the internal battery structure. During the charging process, you need to use the matching dedicated charger, do not replace it with chargers for other equipment at will, and place the battery in a well-ventilated, cool and dry charging area, away from high temperature heat sources and flammable materials. In daily maintenance, there is no need to add extra electrolyte to lithium-ion forklift batteries, and users only need to regularly check the integrity of the shell and the firmness of the wiring terminals, and stop using the battery immediately if there is abnormal bulge or leakage. For lead-acid forklift batteries, the first point to note is to check the liquid level of the internal electrolyte regularly. When the liquid level is lower than the standard warning line, you should add the dedicated distilled water for lead-acid batteries in time, do not add tap water or other unqualified liquids to avoid internal short circuit of the battery that affects normal performance. During the charging process, lead-acid batteries will release a small amount of gas, so the charging site must maintain good ventilation, and open flames are strictly prohibited within a safe range. Users should also arrange regular discharge and activation operation for long-term idle lead-acid forklift batteries, to avoid the situation of battery capacity attenuation caused by long-term power loss. When replacing and disassembling the two types of forklift batteries, users must follow the operation manual requirements, cut off the total power of the equipment first, and do not arbitrarily disassemble the internal structure of the battery without professional guidance. If you encounter any unclear problems in the process of using forklift batteries, you can contact Jianshu New Energy for professional technical support by sending email to 17399989919@163.com, and we also recommend that users refer to the official operation guidelines provided by BYD Forklift for more standardized daily operation specifications, to maximize the service life of the battery and reduce unnecessary use cost.