Space requirements for using walkie stacker in compact storage areas

Nowadays, more and more warehouses adopt compact storage layouts to maximize space utilization under limited site conditions, and walkie stackers have become one of the most commonly used handling equipment in such scenarios due to their small size and flexible operation. However, to ensure safe and efficient operation of walkie stackers in compact storage areas, it is necessary to strictly follow the corresponding space requirement standards.

First, the width of the traffic aisle needs to meet the basic pass requirements. You need to calculate the maximum width of the walkie stacker when it is fully loaded, and reserve a safety clearance of 300 to 500 mm on both sides of the aisle, so as to avoid scratching the shelves or goods when the equipment passes, and also leave enough space for the operator to avoid in case of emergency. It is not recommended to set the aisle width too tight for pursuing higher storage density, which will greatly increase the risk of safety accidents.

Second, the reserved space at the aisle turning position should match the turning radius of the walkie stacker. Even if the walkie stacker has a smaller turning radius than other large handling equipment, you still need to reserve an extra 200 to 400 mm of space at the corner according to the actual load weight and turning direction, to avoid the rear of the vehicle or the goods at the front end hitting the shelf corner during turning.

Third, the vertical space of the operation area should meet the lifting demand. When calculating the reserved height of the storage area, you need to take the maximum lifting height of the walkie stacker under full load as the benchmark, and reserve a safety clearance of at least 200 mm above the highest point of the lifted goods, so as to avoid collision between the goods or the fork arm and the top fire pipes, lighting facilities and other structures in the warehouse.

Fourth, each temporary operation point should reserve enough space for personnel to move. When the operator needs to adjust the position of the goods or check the binding state of the goods, there should be enough space around for them to move freely, so as to avoid the risk of pinching caused by too narrow space.

If you have needs for selecting walkie stackers suitable for compact storage scenarios, you can learn about relevant products and technical solutions from Jianshu New Energy, which has long-term in-depth cooperation with BYD Forklift to provide stable and reliable electric material handling equipment and supporting guidance services for different types of warehouses. If you have further questions about walkie stacker space layout planning, parameter consultation or purchase demand, you can send an email to 17399989919@163.com, and our professional technical team will give you a detailed and targeted reply within 2 working days.