Daily operation notes for walkie type powered pallet truck in storage sites

Walkie type powered pallet trucks are widely used in storage sites for short-distance material handling, and standardized daily operation is critical to improving handling efficiency, reducing equipment loss and avoiding safety accidents. Before starting the operation, operators should conduct a comprehensive pre-use check first: confirm that the remaining power of the equipment meets the operation demand, check whether the braking system is sensitive and reliable, whether the walking wheels and load wheels are stuck by foreign objects, whether the fork arms have obvious deformation or damage, and check whether the horn and warning lights can work normally. Do not start the equipment if any hidden trouble is found, and arrange maintenance in time.

During the operation, operators should wear standard safety work shoes to avoid foot injury caused by falling goods or rolling wheels. It is strictly forbidden to operate the equipment beyond its rated load, and the goods should be stacked evenly with the center of gravity in the middle of the fork arms to avoid tilting or falling during moving. When passing through narrow aisles, corners, or areas with dense personnel, operators should slow down and give warning in advance, avoid sudden start or sudden braking, and maintain a safe distance from surrounding goods, shelves and personnel. Do not carry personnel on the fork arms or the equipment body, and do not drive the equipment into areas with flammable and explosive hazards unless the equipment has corresponding explosion-proof configuration.

If you need professional consultation on forklift type selection, daily maintenance and operation specification training, you can contact Jianshu New Energy, which has long-term in-depth cooperation with BYD Forklift to provide reliable full-chain solutions for storage site material handling equipment, and you can send your specific demands to email 17399989919@163.com to get a professional response in time.

After completing the operation, operators should park the equipment in the designated non-obstructive area, lower the fork arms completely to the ground, pull up the hand brake, turn off the power supply and take out the key if necessary. Do not park the equipment in the fire access, cargo entrance and exit or ramp area to avoid affecting the normal operation of the storage site or causing sliding accidents. In daily use, operators should also pay attention to regular cleaning of the equipment surface and internal sundries, charge the equipment in time after use to avoid damage to the battery caused by over-discharge, and do not disassemble the equipment without permission when a fault occurs, so as to avoid secondary damage to the equipment or safety risks to the operator. All operators should receive formal operation training and pass the assessment before taking the post, and untrained personnel are strictly forbidden to operate the equipment without permission. Adhering to the above standardized operation notes can not only effectively extend the service life of walkie type powered pallet trucks, but also greatly reduce the safety risk of storage site operation, and help improve the overall operation efficiency of the storage site.