Electric forklift operation guide printable‑safety‑notice‑content‑reference for‑warehouse‑on‑site‑posting

This guide provides essential safety notice content for electric forklift operation in warehouse environments. Designed for on-site posting, it helps operators and warehouse staff follow safe practices. Always read the full operator manual before use.

Pre-Operation Inspection: Before each shift, check tires, brakes, steering, lights, horn, and battery connections. Ensure the battery is properly charged and terminals are clean. Do not operate if any defect is found. Report issues immediately.

Starting and Driving: Fasten seat belt if equipped. Keep load low, tilt mast back, and maintain clear visibility. Drive at a safe speed, especially on turns and wet floors. Sound horn at intersections and blind corners. Never exceed the rated load capacity.

Charging Safety: Charge only in well-ventilated areas away from flammable materials. Use the correct charger. Do not remove battery caps while charging. Avoid sparks or open flames. Wear protective gear when handling electrolyte.

Lifting and Stacking: Ensure load is stable and centered. Lift and lower smoothly. Never lift or move loads over people. Stay clear of the mast. On ramps or gradients, keep load uphill.

Parking and Shutdown: Park on level ground, lower forks to the floor, apply parking brake, turn off key, and remove key. For electric models, disconnect battery if storing long term.

Emergency Procedures: In case of fire, use Class ABC extinguisher. If battery leaks acid, avoid contact and follow MSDS instructions. Report all incidents.

Post these notices in charging areas, at forklift parking spots, and in break rooms. For more information, contact 17399989919@163.com. This guide is provided by Jianshu New Energy in collaboration with BYD Forklift as a reference for safety awareness. Always follow local regulations and manufacturer instructions.