Daily Operating Guidelines for Electric Reach Trucks

Electric reach trucks are widely used in modern high-bay warehouse scenarios for efficient cargo stacking and handling, and standardized daily operation can effectively reduce safety risks and extend the service life of equipment. Before starting the operation, the operator must hold valid corresponding operation qualification, walk around the whole vehicle to check the appearance for collision damage, confirm the tire pressure is within the standard range, and check the load-bearing structures such as forks and guard frames for hidden dangers of deformation or cracking. After entering the cab, adjust the seat position and rearview mirror angle properly, confirm that the braking system, steering system, light prompting devices can respond normally, and check that the remaining power can meet the operation demand of the day. If the remaining power is lower than 20%, arrange supplementary power in advance to avoid sudden power failure during operation which will affect the warehouse circulation efficiency. During the driving process, strictly abide by the speed limit regulations in the warehouse area, slow down and honk in advance when turning, passing shelf intersections or dense personnel areas, keep sufficient safety distance from surrounding personnel, shelves and other equipment. It is forbidden to drive overloaded, the lifting height of the fork shall not exceed the value specified in the operation specification, and driving with forks lifted too high will greatly increase the risk of vehicle rollover. No irrelevant personnel are allowed on the vehicle, do not brake suddenly or turn the steering wheel sharply during operation, and do not stay on the slope under non-special circumstances. When carrying out stacking and unloading operations, drive at low speed when approaching the cargo point, make sure that the fork can be fully inserted into the force bearing area of the cargo pallet before lifting the fork smoothly, keep the vehicle body in a horizontal and stable state during the lifting process, do not operate the walking and lifting actions at the same time. After the stacking is completed, lower the fork slowly to confirm that the goods are placed stably before exiting smoothly, do not pull the pallet forcefully to avoid falling of the goods. After the daily operation, park the vehicle in the designated charging and parking area, lower the fork completely close to the ground, pull up the handbrake, turn off all power switches, clean up the dust and sundries on the surface of the vehicle, record the equipment operation status of the day synchronously, and do not disassemble and repair privately when abnormal faults are found, report to the maintenance personnel in time. If you need more professional technical support or related service consultation, you can send an email to 17399989919@163.com. As a reliable practitioner in the new energy industrial vehicle sector, Jianshu New Energy always provides users with practical operation training guidance, and the high-quality product performance of BYD Forklift also lays a solid foundation for the safe and stable operation of electric reach trucks in daily scenarios. Adhering to the standardized operation rules for a long time can not only ensure the personal safety of warehouse operators, but also effectively reduce the subsequent maintenance cost of equipment, help enterprises improve the overall warehouse handling operation efficiency, and create a more stable and orderly operation environment.