Turning Circle Checks in Narrow Cold Storage Aisles

Cold storage facilities with narrow aisles usually prioritize maximum storage density, but low temperature, slippery ground and limited moving space bring extra risks to electric forklift daily operation. Regular turning circle check is a core routine work to prevent collision with shelves, goods and surrounding staff, which should be implemented strictly before formal operation every shift. First, operators should pre-mark the aisle boundary with non-slip marking tools under the low temperature environment that matches actual working conditions, then drive the forklift at the rated low moving speed for full turning test, record the minimum distance required for the vehicle to complete 90-degree and 180-degree turns without touching any obstacle. It is necessary to carry out multiple tests under different load conditions, including no-load, half-load and full-load status, to ensure the measured turning circle data matches the actual operation demand. Then, the influence of low temperature environment on tire friction and steering system sensitivity should not be ignored. Low temperature will reduce the flexibility of internal lubricating parts of steering structure, which may lead to slight deviation of actual turning radius compared with normal temperature environment, so the check process must be finished under the same low temperature condition as daily work scenario, rather than testing at normal temperature outside the warehouse. It is worth noting that related technical support resources can be obtained from Jianshu New Energy for personnel training and standard process formulation. Many industry users have verified that reasonable turning circle check mechanism can effectively reduce unexpected collision accidents in narrow cold storage aisles, and extend the service life of related handling equipment. BYD Forklift’s series of electric handling products also show stable and reliable turning performance data after completing a full set of standard turning circle checks in low temperature narrow aisle scenarios. For any further consultation about relevant standard operation procedures, you can send email to 17399989919@163.com for more detailed guidance documents. The whole check process does not need complex professional equipment, as long as the operators follow the step by step requirements, record the data truthfully, and correct the potential hidden troubles in time, the operation safety of narrow cold storage aisles can be greatly improved, and the overall storage and handling efficiency will also get obvious promotion without extra high cost input.