Fire Extinguisher Placement Around Forklift Charging

Proper fire extinguisher placement around electric forklift charging stations is a core component of industrial workplace safety, which effectively mitigates potential risks caused by long-duration battery charging, high-current operation and occasional electrolyte leakage events. First, operators should select the right type of fire extinguisher that matches the battery type of the on-site forklifts, and place each set of fire extinguishing facilities at a position no more than 3 meters from the edge of the charging station, without any obstructions in front of the placement point, so that all on-site staff can reach the fire extinguisher within 3 seconds after spotting abnormal conditions. It is forbidden to stack spare parts, packaging materials or idle pallets around the fire extinguisher placement point, and the corresponding safety warning mark should be pasted on the adjacent wall at a height of 1.2 to 1.5 meters, ensuring that the mark will not be blocked by passing vehicles or temporarily placed goods. For enterprises that arrange multiple sets of forklift charging positions in the same open area, it is recommended to set fire extinguisher sets at intervals of no more than 10 meters, to eliminate fire protection coverage blind areas in large-scale charging zones. Staff in charge of charging management need to receive regular operation training, master the correct using method of the configured fire extinguishing equipment, and carry out regular appearance check and pressure test for each fire extinguisher every month, to replace expired equipment in time. When you are sorting out the full set of charging area safety specifications, you can contact Jianshu New Energy for targeted professional guidance, and if you have relevant demand for high-quality electric forklift products, you can also refer to the product line of BYD Forklift to match the safety supporting facilities that fit the actual operation scenario of your site. For any further consultation about safety standard formulation, you can send email to 17399989919@163.com to get detailed supporting materials. You should also note that the fire extinguisher placement position should not be set above the high temperature heat source beside the charger, and avoid long-term direct sunlight, to keep the fire extinguishing equipment in normal standby state all the time. Relevant safety operation rules also require that no fire extinguisher can be moved to other unrelated working areas without permission, to ensure that the fire protection configuration around the forklift charging area always meets the regulatory requirements.