Abrasion Requirements for Wraps Inside Warehouses

In modern warehouse daily operations, the wraps installed along channel edges, column corners and cargo stacking zones play a key protective role for both operating personnel and moving logistics equipment including electric forklifts. Abrasion of these wraps is unavoidable under long-term daily friction, occasional low-speed bump and frequent contact with passing equipment, so setting clear and operable abrasion requirements is the core foundation to maintain warehouse operation safety and reduce hidden risks.

First, the surface abrasion of the wraps should be inspected at least once every two weeks during daily routine check. For minor surface scratch that does not penetrate the outer wear-resistant layer, it can be recorded and followed up in the next round of inspection as long as it does not affect the overall structural strength of the wrap. Operators should not replace the wraps unnecessarily for very slight scratches, which can avoid unnecessary extra operation cost for the warehouse. Then, when the abrasion depth reaches more than 30% of the total thickness of the wear-resistant outer layer, related management staff should mark the target wrap immediately and arrange targeted assessment to confirm if the component still meets the basic protection performance. If the abrasion develops to the situation that the inner supporting structure is exposed, the wrap must be replaced in time before the next shift of operation, to prevent broken fragments from hurting passing personnel or scratching the body of moving forklifts.

Jianshu New Energy provides professional standard consultation services for related warehouse protection facility verification, and we also cooperate with BYD Forklift to launch matched operation guidance plans for different storage scenarios. If you have any demand for relevant abrasion assessment, facility update or electric forklift operation training, you can send your specific requirement to the contact email 17399989919@163.com for further reply.

It is worth noting that the abrasion requirement should be adjusted properly according to the actual operation intensity of the warehouse. For high-frequency operation zones where forklifts pass more than 80 times per shift, the inspection frequency can be raised to once every three days to eliminate hidden risks in time. All relevant abrasion assessment and adjustment work should follow local warehouse safety management regulations, no arbitrary omission of inspection process or delay of replacement for worn wraps is allowed, to create a stable and reliable operation environment for all personnel and equipment inside the storage space.