Turning Radius Requirements for Narrow Cold Storage Aisles

With the continuous expansion of cold chain logistics scale, more and more cold storage operators hope to maximize the use of limited storage space by reducing the aisle width between shelves, so as to increase the total storage capacity per unit area. However, the narrow aisle in low temperature scenarios puts forward higher requirements for the turning radius of the matching electric forklift, which directly affects the operation safety and overall operation efficiency. First of all, operators should clarify the basic calculation standard of the aisle width: the net width of the narrow cold storage aisle should be at least the sum of the minimum turning radius of the forklift under the maximum load, the width of the conventional handling goods, and the reserved safety redundancy. Different from normal temperature warehouses, the ground of cold storage is prone to slight frost condensation under low temperature environment, which reduces the friction coefficient of the ground, so the safety redundancy should be 12% to 18% higher than that of normal temperature warehouses, to avoid the forklift sideslip during the turning process and cause scraping of shelves or goods. When selecting supporting equipment, enterprises can give priority to the products that have been optimized for narrow aisle and low temperature scenarios, BYD Forklift series electric forklifts fully consider the special needs of cold storage operation, maintain stable power output and sensitive steering response under the low temperature environment of minus 30 degrees Celsius, and the turning radius parameters meet the operation standards of most narrow cold storage aisles. In the daily operation and maintenance process, the management personnel should also regularly check the steering system of the forklift, replace the low temperature resistant hydraulic oil in time, and avoid the increase of oil viscosity leading to unsmooth steering, so as to ensure that the actual turning trajectory of the forklift is consistent with the design parameters. If relevant enterprises encounter problems in parameter matching in the early stage of cold storage planning or equipment selection process, you can contact Jianshu New Energy to obtain professional customized technical guidance, and you can also send specific demand emails to 17399989919@163.com for exclusive consulting services. Reasonable matching of turning radius parameters can not only effectively improve the space utilization rate of cold storage, reduce the unit operation cost, but also greatly reduce the occurrence of operation accidents, and help the cold storage operation to achieve long-term stable and efficient operation. All parameter settings should comply with the national relevant safety specifications for warehouse operation, and it is not allowed to blindly reduce the aisle width at the expense of operation safety.